Recommendations adopted by the session

 

 

Recommendation 1 (cImO-xii)

possible conflicts with external standardization ORGANIZATIONS

 

THE COMMISSION FOR INSTRUMENTS AND METHODS OF OBSERVATION,

Noting:

(1) Recommendation 3 (CIMO-XI) — Participation in the Work of the International Organization for Standardization (ISO),

(2) That WMO is developing standards in the form of recommendations for application by Members,

Considering:

(1) Members’ active participation in ISO which must continue,

(2) That international organizations outside WMO, such as ISO and regional organizations for standardization, such as the European Committee for Standardization (CEN), are increasingly dealing with matters related to the measurement of meteorological variables,

(3) That the application of such adopted international and regional standards are normally obligatory for Members of such multinational bodies and any conflicting national standards (such as measurement of meteorological variables recommended by WMO) must be withdrawn,

Urges Members to:

(1) Take into account these activities to avoid any conflicts with WMO recommendations by asking their national standard bodies to provide information on relevant activities for developing standards;

(2) Actively participate in the work of the standard bodies concerned to prevent duplication of work and diverging results from WMO’s recommendations;

Publicize the work of WMO in the area of meteorological standards and the existence of the Guide to Meteorological Instruments and Methods of Observation as a basic reference for meteorological measurements.

 

Recommendation 2 (CIMO-XII)

COMPUTATIONAL FORMULAE AND ALGORITHMS FOR USE IN AUTOMATED OBSERVING SYSTEMS

 

THE COMMISSION FOR INSTRUMENTS AND METHODS OF OBSERVATION,

Noting Recommendation 5 (CIMO-XI) — Algorithms for Automatic Weather Stations and Recommendation 7 (CIMO-XI) — Instrument Development,

Considering:

(1) The increasing use of Automatic Weather Stations (AWSs) and Advanced Observing Systems (AOSs) by Members,

(2) The need for the further development of even the most advanced systems currently available,

(3) The need to further develop or refine computational and reduction formulae for some variables,

(4) The needs of different data users for homogeneous datasets as expressed by other Technical Commissions,

(5) The difficulties encountered by users in introducing AOS,

(6) A growing trend amongst manufacturers of meteorological equipment and Members to protect their intellectual property rights in respect to their own algorithm and AOS developments,

(7) The need for guidance for instrument and system designers,

Recommends:

(1) That Members should introduce into service only those systems which are sufficiently well documented so as to provide adequate knowledge and understanding of their capabilities, characteristics and any algorithms used;

(2) That Members should retain or develop sufficient technical expertise to enable them to specify system requirements and to assess the appropriateness of the capabilities and characteristics of such systems and the algorithms used in them;

Urges Members to publish and make available to WMO any algorithms used in their systems to derive meteorological variables, which may be suitable for recommendation by WMO as standard algorithms;

Encourages Members to:

(1) Ensure that instrument and system designers work closely with relevant users to understand fully user requirements and concerns;

(2) Ensure instrument and system designers publish and disseminate, for widespread use, descriptions of the data processing algorithms utilized in their systems;

(3) Thoroughly test and evaluate new algorithms and systems being introduced, and disseminate the test results in the form of performance characteristics to users of the observations;

Evaluate thoroughly, through field testing, the relationship of new algorithms and systems to previous methods, and establish transfer functions for use in providing data continuity, and disseminate these data to users.

 

 

Recommendation 3 (CIMO-XII)

INTRODUCTION OF NEW METEOROLOGICAL INSTRUMENTS

 

THE COMMISSION FOR INSTRUMENTS AND METHODS OF OBSERVATION,

Noting the introduction of new meteorological instrumentation, especially of Automatic Weather Stations (AWSs);

Considering:

(1) The effects of new technology on climatology measurements,

(2) The possibility of inhomogeneity of time series when AWS are introduced,

(3) The differences in location (e.g. in siting and exposure) of old instrumentation and the location of the new AWS instrumentation,

Urges Members to:

(1) Ensure overlapping periods of comparable/overlapping measurements between conventional and new automated instrumentation;

(2) Ensure proper documentation is available on differences between the old and the new site as well as on instrumentation changes (Metadata);

Consider the specific requirements of national climatological services and the recommendations of the WMO Commission for Climatology (CCl), as appropriate, to ensure effects of AWS implementation on climatology are well-recognized and understood.

 

 

Recommendation 4 (CIMO-XII)

REQUIREMENTS, EVALUATION AND VALIDATION OF NEW AUTOMATED SYSTEMS

 

THE COMMISSION FOR INSTRUMENTS AND METHODS OF OBSERVATION,

Noting:

(1) The increased use of automated systems for observation of meteorological variables,

(2) Recommendation 3 (CIMO-XII) — Introduction of new meteorological instruments,

(3) The need for making meteorological observations more reliable and cost-effective,

Considering:

(1) That there are significant differences between manual and automated observations,

(2) That there are many difficulties in implementing and operating AWSs and gaining user acceptance,

(3) That automation improves quality and consistency of observations in some areas and provides more frequent observations,

(4) The urgent need for adequate training and education of operators and users,

(5) The reluctance by some users, such as the aeronautical communities, to accept full automation,

(6) The difficulties experienced by Member countries in gaining acceptance of automation of visual elements as implemented with AWSs,

Invites other Technical Commissions (especially CAeM and CBS) to:

(1) Redefine requirements, specifically addressing the variables reported by AWSs;

(2) Assist in determination of standard requirements for AWSs;

(3) Support development of reporting methods to accommodate both traditional and automated systems;

Urges Members to:

(1) Fully explore user requirements and engage users in system design of AWSs;

(2) Engage users in validation and evaluation of the new automated systems;

(3) Engage manufacturers in the system assessment and need for improvements in performance;

(4) Develop detailed guides and documentation on the system to support all users;

(5) Develop adequate programmes for maintenance and calibration support of the AWSs;

(6) Consult and cooperate with users, such as aeronautical bodies, in particular throughout the process from AWS design to implementation to operational use;

Develop and apply reporting methods for national use to accommodate both observations generated by traditional and automated systems.

 

 

 

 

Recommendation 5 (CIMO-XII)

AUTOMATIC WEATHER STATION (AWS) REPORTING CODE

 

THE COMMISSION FOR INSTRUMENTS AND METHODS OF OBSERVATION,

Noting:

(1) The increasing use of automatic weather observing equipment to report meteorological and other variables,

(2) The capability of obtaining new types of observations and significantly more data from automated observing equipment,

(3) That the present wawa 4680 code used for AWS reports has significant shortcomings,

Considering:

(1) Requirements for data which existing WMO reporting codes are unable to accommodate,

(2) The capability of automated observing systems to report data which human observers cannot provide,

(3) The importance of data homogeneity and compatibility on a global basis,

(4) The continuous need to provide well-defined requirements for AWS to manufacturers,

Invites the Commission for Basic Systems:

To consider and implement the recommendations of the expert meeting on automation of visual and subjective observations including specifically:

(1) Proposals for observation sampling intervals;

(2) Changes to the "present weather" encoding to eliminate inconsistencies and to better reflect the capabilities of AWS;

(3) The use of BUFR, CREX or other suitable codes for AWS data reporting;

(4) The use of water equivalent in mm/h as a means of expressing the intensity of all types of precipitation rather than the so far subjectively determined terms of "light", "moderate", "heavy", and "violent" which are not quantitatively determined because of significant regional climate deviations;

Urges Members to:

Improve the definition of their requirements for visual and subjective observations, in particular with respect to:

(1) areas of application for which data are no longer required;

(2) areas of application for which different or new data are needed;

Prioritize the requirements for data to be provided by AWSs.

 

 

Recommendation 6 (CIMO-XII)

MEASUREMENT PROCEDURES, A SECONDARY REFERENCE standard FOR SOLID PRECIPITATION MEASUREMENTs, AND THE ADJUSTMENT OF SOLID PRECIPITATION GAUGE DATA

THE COMMISSION FOR INSTRUMENTS AND METHODS OF OBSERVATION,

Noting:

(1) The report of the Chairman of the International Organizing Committee for the WMO Solid Precipitation Measurement Intercomparison,

(2) The WMO Solid Precipitation Measurement Intercomparison — Final Report, published in the Instruments and Observing Methods Report No. 67,

Considering:

(1) The need for a practical reference standard for the measurement of solid precipitation,

(2) The results of the WMO Solid Precipitation Measurement Intercomparison,

(3) The need to examine further issues related to precipitation in very cold regions, high wind conditions, blowing snow, the recording of trace precipitation, and automatic recording gauges,

Recommends that Members:

(1) Apply the Double Fence Intercomparison Reference (DFIR) as a secondary reference for the measurement of solid precipitation*;

(2) Consider implementation of the appropriate methods presented in the Report No. 67 (WMO/TD-No. 872) of the WMO Solid Precipitation Measurement Intercomparison to adjust solid precipitation measurements and archived precipitation data;

(3) Keep separate archives of original and adjusted data.

_________

As defined in the WMO Instruments and Observing Methods Report No. 67 (WMO/TD-No. 872) 1988.

 

 

Recommendation 7 (CIMO-XII)

REVISION OF THE RESOLUTIONS OF THE EXECUTIVE COUNCIL BASED ON PREVIOUS RECOMMENDATIONS OF THE COMMISSION FOR INSTRUMENTS and METHODS OF OBSERVATION

 

THE COMMISSION FOR INSTRUMENTS AND METHODS OF OBSERVATION,

Noting with satisfaction the actions taken by the Executive Council on the previous recommendations of the Commission for Instruments and Methods of Observation,

Considering one of the previous Executive Council Resolutions as still valid,

Recommends:

(1) That Resolution 8 (EC-XXV) — International interim reference instruments for the measurement of evaporation and Resolution 4 (EC-XLVI) — Report of the eleventh session of the Commission for Instruments and Methods of Observation should not be kept in force;

(2) That Resolution 13 (EC-XXXIV) — Development and comparison of radiometers, be kept in force.